# Include your customized HAL commands here
# The commands in this file are run after the AXIS GUI (including PyVCP panel) starts

net mpg pyvcp.mpg-chkbtn => cncextension.enableMpg

# Vacuume and coolant
addf xor2.0 servo-thread
net sigVacuumeBtn pyvcp.vacuume-chkbtn => xor2.0.in0
net sigIoctlFlood iocontrol.0.coolant-flood => xor2.0.in1
net vacuume <= xor2.0.out
net vacuume => cncextension.wr1

addf xor2.1 servo-thread
net sigAirBtn pyvcp.air-chkbtn => xor2.1.in0
net sigIoctlAir iocontrol.0.coolant-mist => xor2.1.in1
net air <= xor2.1.out
net air => cncextension.wr2

# Alcohol
net alcohol pyvcp.alcohol-scale-i => cncextension.pwm
net alcoholPrime pyvcp.prime-chkbtn => cncextension.pwmPrime

# Spindle inhibit
net spindle-inhibit => pyvcp.feed-inhibit-led

addf or2.2 servo-thread
net touchoffall-btn pyvcp.touchoffall-btn => or2.2.in0
net button1 cncextension.button2 => or2.2.in1

# MDI Commands
net m600 halui.mdi-command-00 <= pyvcp.m600-btn
net g0x0y0 halui.mdi-command-01 <= pyvcp.x0y0-btn
net g53g0x0y0z0 halui.mdi-command-02 <= pyvcp.g53g0x0y0z0-btn
net g53g0z0 halui.mdi-command-03 <= pyvcp.g53g0z0-btn
net microscopeHightBtn halui.mdi-command-04 <= pyvcp.g53g0z-40-btn
net g10l20x0y0z0 halui.mdi-command-05 <= or2.2.out
net g10l20x20y20 halui.mdi-command-06 <= pyvcp.microscope-btn
net g53g10l20pin halui.mdi-command-07 <= pyvcp.touchoffpin-btn
net touchofzpin halui.mdi-command-08 <= pyvcp.touchofz-btn

# Collisionavoid
net collision-stop => pyvcp.collision-led
net chuck pyvcp.chuck-chkbtn => collisionavoid.chuck
setp pyvcp.chuck-chkbtn.changepin 1

# Autolevel
net levelpin pyvcp.level-chkbtn => compensation.enable-in
net runalprobe halui.mdi-command-09 <= pyvcp.alprobe-btn

# Autolevel spinbox display
net alprsx pyvcp.alprsx => pyvcp.alprsxDisp
net alprsy pyvcp.alprsy => pyvcp.alprsyDisp
net alintervl pyvcp.alintervl => pyvcp.alintervlDisp
net alheight pyvcp.alheight => pyvcp.alheightDisp

# Jitter display
net jitter <= timedelta.0.jitter
net jitter => pyvcp.jitter-disp
net jitter-reset <= pyvcp.jitter-rst-btn
net jitter-reset => timedelta.0.reset